ชุดควบคุมอุณหภูมิและการปั่น ในถังปฏิกรณ์ FerMac 231 Temperature & agitation control module
SKU : ELTL-FRMC-231
รายละเอียดสินค้า
Temperature & agitation control module
The FerMac 231 Temperature and Agitation control module is equipped with a powerful direct drive DC motor. Uniquely, the motor locking system also tightens as the motor drives harder, preventing vibration and enabling the agitator to work with the most viscous of media. Agitation speed is easily set by a single control knob.
Industry standard sensor
Temperature control is achieved using an industry standard Pt100 sensor for stable measurement with the temperature displayed on an LED display. A single push switch changes the display to read the set point parameters.
On demand cooling
The bioreactor is heated by a wrap-around silicone heater blanket which operates at low voltage, making it safe to use in the wet laboratory environment. It can easily be wiped clean if it becomes soiled, and we are able to produce special heater jackets (or mats) on request for your specific purpose.
Cooling is on demand, operated by a valve mounted on a separate service plate and enables cooling water to circulate through the heat exchanger. Water and electrics are kept strictly segregated.
The FerMac 231 Temperature and Agitation control module is equipped with a powerful direct drive DC motor. Uniquely, the motor locking system also tightens as the motor drives harder, preventing vibration and enabling the agitator to work with the most viscous of media. Agitation speed is easily set by a single control knob.
Industry standard sensor
Temperature control is achieved using an industry standard Pt100 sensor for stable measurement with the temperature displayed on an LED display. A single push switch changes the display to read the set point parameters.
On demand cooling
The bioreactor is heated by a wrap-around silicone heater blanket which operates at low voltage, making it safe to use in the wet laboratory environment. It can easily be wiped clean if it becomes soiled, and we are able to produce special heater jackets (or mats) on request for your specific purpose.
Cooling is on demand, operated by a valve mounted on a separate service plate and enables cooling water to circulate through the heat exchanger. Water and electrics are kept strictly segregated.
เปรียบเทียบสินค้า
0/4
ลบทั้งหมด
Powered By
MakeWebEasy
MakeWebEasy